October 25, 2006 10:19 PM
SAVE TIME WITH LAKEWOOD’S NEW EZ - ADJUSTABLE DOWEL PINS
LAKEWOOD’S NEW EZ - ADJUSTABLE DOWEL PINS
The new Lakewood EZ-Adjustable Dowel Pins are a snap to use and will save a lot of valuable mechanic time installing and aligning your bellhousing.
Continue reading SAVE TIME WITH LAKEWOOD’S NEW EZ - ADJUSTABLE DOWEL PINS »
October 2, 2006 09:47 AM
FAST™ Dyno Air/Fuel Meter Helps Tune For Maximum Horsepower And Torque
FAST™ Dyno Air/Fuel Meter
Revolutionary new meter measures the engine’s air/fuel ratio with two sensors, not one
The FAST™ Dyno Air/Fuel Meter is the first easy-to-use, two-sensor, wide-band air/fuel meter available for engine tuners and dyno operators. By incorporating sensors in both of the engines exhaust outlets (not just one sensor like competitive air/fuel meters), engine tuners receive the full story on the engine’s true state of tune. With the FAST™ Dyno Air/Fuel Meter, you can read both exhaust sensors individually or average them together for a super accurate reading. For engine tuners on a budget, a single sensor version is available that can later be upgraded to the two-sensor technology
Continue reading FAST™ Dyno Air/Fuel Meter Helps Tune For Maximum Horsepower And Torque »
Car Performance Parts, Hot Rod Performance Parts, Import Car Performance Parts, Import Truck Performance Parts, Jeep Performance Parts, Off Road Performance Parts, Sand Toys Performance Parts, Tools, Truck Performance Parts | Permalink
September 5, 2006 08:50 PM
Powerhouse® Products Braided Hose & Fitting Assembly Tool Make Installing Hose Ends Easy
Powerhouse® Products Braided Hose & Fitting Assembly Tool
Simple tool installs hose ends even on old and worn braided steel hoses
Anyone who has worked with braided steel hose lines knows the frustration of installing hose ends. Sure those braided hoses may look great when fitted to your engine, but fighting with slightly frayed braided steel hoses can cause you to wish for simple neoprene hoses instead. To the rescue are the new Powerhouse® Products Braided Hose & Fitting Assembly Tool Kits, which quickly and neatly install hose ends without any of the hassle. Two kits are available. Each kit works with three different hose sizes and are broken down into small (-4, -6 and -8 AN) hoses and large (-10, -12 and -16 AN) hoses.
August 8, 2006 01:01 AM
Powerhouse® Releases New Valve Lash Adjusting Torque Wrench
Powerhouse® New Valve Lash Adjusting Torque Wrench
Avoid too loose or too tight lash adjustments with new specialty tool that gets it just right
Setting your engine’s valve lash is one of those chores that always leave a note of doubt in your mind - did I get that rocker adjuster on tight enough? Powerhouse® Products takes the guesswork out of valve lash adjustment with a torque wrench specially created to make certain you get the exact torque setting you need. Best of all, the new Powerhouse® Products Valve Lash Adjusting Torque Wrench comes complete with three different size T-handle hex wrenches: 3/16, 5/32 and 1/8-inch, pre-set for 20 ft lbs of torque application, the industry standard.
Continue reading Powerhouse® Releases New Valve Lash Adjusting Torque Wrench »
June 26, 2006 12:26 PM
COMP Cams® Quick Reference Valve Spring Charts Now Available
COMP Cams® Quick Reference Valve Spring Charts
Dual-sided installed height and outside diameter info charts make choosing the right spring easier than ever
With the wealth of products available from COMP Cams® today, it’s easy to become confused about the perfect valve spring choice for your engine. That process just became easier with the debut of COMP Cams® Quick Reference Valve Spring Charts. Offered for the first time as a dual-sided display, these high quality 39 x 26-inch charts feature every COMP Cams® valve spring currently available.
Continue reading COMP Cams® Quick Reference Valve Spring Charts Now Available »
Powerhouse® Heavy-Duty Manual Valve Spring Compressor Handles High Spring Pressures
Powerhouse® Heavy-Duty Manual Valve Spring Compressor
Heavy-duty manual spring compressor is designed for professional builders but priced economically for novice engine builder affordability
At last there’s an easy-to-use manual valve spring compressor sturdy enough to carry the Powerhouse® Products name. Built to handle those high rate valve springs used on today’s high performance engines, the Powerhouse® Products Heavy-Duty Manual Spring Compressor features a welded steel, box-tubing frame and utilizes an over-center type clamping device that can compress any valve spring.
April 21, 2006 03:11 PM
FAST™ Dual Sensor Air/Fuel Meter Delivers Increased Tuning Accuracy
FAST™ Dual Sensor Air/Fuel Meter Delivers Increased Tuning Accuracy
Dual sensor capability and easy-to-use format allow even novice tuners to monitor air/fuel ratio with precision accuracy
Proper engine tuning is essential to achieving maximum performance and avoiding costly, premature engine failure. Unfortunately, until now digital air/fuel meters have only offered single sensor measuring capability. This meant engine tuners were only able to monitor the air/fuel ratio in one side of the engine, while being left to play a guessing game with the other engine bank. Now there is a way to eliminate the unknown, allowing you to tune with confidence and complete accuracy.
Continue reading FAST™ Dual Sensor Air/Fuel Meter Delivers Increased Tuning Accuracy »
March 20, 2006 03:38 PM
Gear Head Tools Introduces A Lifter Bushing Installer
Gear Head Tools Introduces A Lifter Bushing Installer
2006 Gear Head Tools has just released a tool to make installing both keyed and plain lifter bushings quicker, simpler and more precise. The main body of the tool slides into the camshaft tunnel where it is mated with a threaded rod over which slides the bushing line-up mandrel, while another mandrel installs in an adjacent lifter bore. A bridge keeps everything properly aligned while a spanner presses the lifter bushing into place.
Continue reading Gear Head Tools Introduces A Lifter Bushing Installer »
February 28, 2006 09:36 AM
New ZEX™ V8 Spark Plug Tuning Kits
New ZEX™ V8 Spark Plug Tuning Kits
Two portable spark plug kits make on-site, state-of-the-art engine tuning easy
Successful racers know they must be ready for anything. Something as seemingly simple as having the right spark plugs can make the difference between winning and losing. The new ZEX™ V8 Spark Plug Kits ensure that you’ll be ready with not only the right plugs for the job, but state-of-the-art technology as well.
Continue reading New ZEX™ V8 Spark Plug Tuning Kits »
December 27, 2005 09:04 AM
Powerhouse® Products Introduces Wide Band Air/Fuel Meter Kit
Powerhouse® Products Introduces Wide Band Air/Fuel Meter Kit
Compact size allows for easy air/fuel ratio assessment from inside vehicle
Achieving a perfect balance of engine tuning is made easy with the new Powerhouse® Products Wide Band Air/Fuel Meter kit which allows for accurate measurement of current engine air/fuel ratio for both carbureted and fuel injected engines. With features such as an extended 44 minute data capacity and in-depth PC software package, the Powerhouse® Products Wide Band Air/Fuel Kit is the perfect addition to any mechanic's or racer's tool box. Since not all racer's or hot rod enthusiasts have access to a dyno this will be the next best thing for a fraction of the cost.
Continue reading Powerhouse® Products Introduces Wide Band Air/Fuel Meter Kit »
